Omkar Industries

Moghul Wada, Vadodara, Gujarat
GST No. 24AADFM8824H1Z9
TrustSEAL Verified
Call 0804860071570% Response Rate
SEND EMAIL
 

About Us

Application Methods

Brush, roller, conventional spray and air spray are some of the methods, which can be used to apply paint.

Following is the application method:

 

  • Do not apply paint if temperature is bellow 10 C or relative humidity rises above 90% or during fog, rain or mist
  • All the two component coating system requires very specific time to achieve full cure properties
  • Any contaminants during this specific period by foreign bodies will failure of coating.
  • If the coating is contaminated as per above say even slight rain the coating should be scraped thoroughly and threw fresh layer should be applied as per above
  • Brushes and spray equipment are to be clean with thinner to avoid clogging damages.
  • Do not thin by more than 10% of the volume
  • Close lid required quantity that can be consumed within the pot life of coating
  • Stir the contents individual prior to mixing, mix the both contents as per recommended ratio, stir the contents thoroughly till it becomes homogeneous then allow the mixture for maturation period as per requirement
  • Mix only required quantity that can be consumed within the pot life of coating
  • Close lid tightly as the material is moisture sensitive
  • Apply uniformly and in even passes
  • Keep away from heat and store under shade
For more Information:Contact Us
zoomup




Reach Us
Urvesh Shah (Partner)
Omkar Industries
No. 3, Anand Industrial Estate, Opposite Yamuna Mill Road, Dabhoi Road
Moghul Wada, Vadodara - 390004, Gujarat, India


Call Us


Send E-mail